When a Cleveland Motion Controls (CMC) system fails, production lines can quickly experience downtime, instability, or complete stoppage. These systems often rely on precision motion control, making accurate and reliable restoration essential. At Servotech, we specialize in comprehensive Cleveland Motion Controls (CMC) servo motor repair services, providing advanced diagnostics, component-level troubleshooting, and full refurbishment solutions.
Our technicians are experienced in working with CMC servo motors, many of which are now considered legacy or obsolete. Because of this, effective repair often requires deep technical expertise, access to specialized components, and the ability to reverse engineer or fabricate parts when necessary.
Cleveland Motion Controls (CMC) AC Servo Motor Repair
Each CMC AC servo motor that arrives at our facility undergoes a complete diagnostic evaluation to determine the root cause of failure. Our AC servo motor repair process includes detailed inspection of electrical components, feedback systems, and mechanical assemblies to ensure every issue is properly identified and addressed.
CMC AC servo motors are often used in tightly integrated automation systems, where precision feedback and consistent performance are critical. Once repairs are completed, each motor is thoroughly tested under simulated operating conditions to confirm it meets performance expectations and is fully compatible with factory control systems. This ensures reliable operation once the unit is returned to service in demanding industrial environments.
Cleveland Motion Controls (CMC) DC Servo Motor Repair
CMC DC servo motor repair requires a highly detailed and methodical approach due to the age and complexity of many of these systems. Each motor is fully disassembled, cleaned, and inspected to assess wear on electrical and mechanical components.
DC servo motors rely on carbon brushes to function, and these components naturally degrade over time, often leading to internal contamination within the motor. Our repair process includes full replacement of worn brushes, thorough cleaning of all internal components, and restoration of proper mechanical alignment to extend motor life.
Because many CMC DC servo motor components are no longer manufactured, Servotech maintains the capability to source, adapt, or fabricate replacement parts in-house. Our machining and fabrication capabilities allow us to reproduce obsolete components when necessary, helping extend the life of legacy systems that would otherwise require full replacement.
Servotech provides complete Cleveland Motion Controls (CMC) AC servo motor repair and DC servo motor repair services designed to restore performance, reduce downtime, and extend equipment life. With extensive diagnostic capabilities and the ability to support obsolete technologies, we help businesses maintain critical motion control systems with confidence. Every repaired motor is thoroughly tested before return to ensure dependable operation in real-world conditions. When reliability matters, Servotech is a trusted partner for CMC servo motor repair and long-term support.
Our Repair & Refurbishment Process
1. Checking In
- Motor is photographed and documented by our receiving department
- Unique job number is assigned
- Acknowledgement is sent via email
- Motor is delivered to the appropriate department to be evaluated
2. Evaluation
The evaluation of each Cleveland Motion Control (CMC) servo motor is extremely thorough and is 100% free for all our customers. Our technicians fully inspect all mechanical and electrical parts. They also perform multiple tests to determine the cause of failure. This includes, but is not limited to:
- Bearing fits
- Housing fits
- Worn output shafts
- Corroded and/or broken flanges
- Burnt stator windings
- Failed encoders
- Damaged connectors
3. Quote
Our purchasing department then generates a firm quote, outlining the cause for failure and listing all needed parts for repair. Our team excels in sourcing any parts that are not already stocked in our extensive inventory. We understand that getting your machine up and running is of utmost importance, and we go above and beyond to offer you the quickest turnaround possible.
4. Servo Motor Repair
Once the quote is approved, orders are placed for any needed parts and our technicians proceed with repairs. Anything that requires our in-house services, such as winding or machine work, is taken to the corresponding department. When ready, the motor is re-assembled with all new parts and hardware, bringing it to good-as-new condition.
5. Final Testing
Upon completion of repairs, the motor heads to our quality control department for final testing. Here, we review the entire repair and run it on a factory-specific drive. Using the same type of drive used in your system ensures that your Cleveland Motion Control (CMC) servo motor will perform as expected once re-installed. We take great pride in maintaining an inventory of factory drives as it allows us to offer the most effective, reliable refurbishment possible.
6. Painting & Re-Labeling
Not only does a fresh coat of paint make your Cleveland Motion Control (CMC) servo motor look brand new, but it also provides protection from outside contaminants, extending the overall lifespan of the motor. Our painting department provides application-specific paint, such as:
- Food grade epoxy
- IP67 epoxy
- Marine epoxy
7. Return Shipping
Our shipping department takes pride in offering the highest quality care when preparing a refurbished motor for its journey back to you. Protective caps are put on connectors, nameplates are applied to the motor, and documentation is reviewed to ensure any accessories, such as eye bolts or shaft keys, are returned. Our high-quality spray foam packaging system creates a mold around the motor to keep it safe during shipping. For larger motors that require freight shipping, we build a custom crate on-site to fit each motor’s unique size and shape.
Frequently Asked Questions (FAQ's)
Can I get a quote to repair my Cleveland Motion Control (CMC) servo motor prior to sending it in?
No, we need to have the servo motor in-house to provide a firm quote, but we can typically give you a ballpark or base price over the phone. Call our expert staff at 860-632-0164 and have your CMC servo motor’s model number handy.
Where do I send the servo motor?
Send your Cleveland Motion Control (CMC) servo motor to the address below. No need to address it to anyone’s attention—our receiving department will know exactly what to do when it arrives.
Servotech, Inc.
478 Timber Ridge Road
Middletown, CT 06457
How long will it take to rebuild or repair my Cleveland Motion Control (CMC) servo motor?
Our standard lead time is 5 business days, if all parts are in stock. You may consider our Rapid Response service for an additional 15%, for a 48-hour turnaround.
Do you offer a warranty on repairs or refurbishments?
Yes, we offer a one-year in-service warranty on Cleveland Motion Control (CMC) servo motor repairs and refurbishments. This means the warranty period begins the day your servo motor is installed.
What is your service area?
We service all major regions around the world (Americas, Europe, Asia, Africa and Oceania). If you can ship us your servo motor, we can provide a solution. We support customers throughout and outside of the United States.
Servotech is an independent service provider and is not affiliated with or endorsed by Cleveland Motion Control (CMC). All trademarks are the property of their respective owners.
